Dell Wyse WES7 conversion kit for Z class Instalační příručka stáhnout pdf (Strana 15)

Installing WES7 Firmware 11

Figure 12 Prepare USB drive

11.Select the USB key onto which you want the configurations (you can use Refresh as

needed to recognize an inserted USB key), and then click Next. The progress bars

show the overall (formatting and configuration) progress and task progress.

Caution

DO NOT interrupt the formatting and configuration process. All process

requirements are done automatically. The progress screen may display for

several seconds or longer. You can safely ignore any error message.

12.After configuration, click Finish to close the wizard and then remove the configured

USB key for use (you will use the configured USB key on your target devices).

Tip

At this time you can also replicate/duplicate the configured USB key

(containing the firmware you want to push) for simultaneous usage on target

devices (by users in several locations at the same time). For full Wyse USB

Firmware Tool details, see Users Guide: Wyse

USB Firmware Tool 1.16.

Step 4: Use the Configured USB Key to Install Firmware on Each Thin Client

In this step, you will boot each target device you want to convert from the configured USB

key so that the USB key will push the contents from the USB key onto the target device.

1. Be sure the client is shut down and disconnected from any network.

2. Attach the configured USB key to the thin client.

3. Power on the thin client and during boot, press and hold the P key.

4. Select the USB HDD drive option from the menu (this option also displays the brand of

your configured USB key).

5. Press Enter and follow the process prompts. When booting a target device from the

configured USB key (containing the contents to be pushed to a target device), you will

be prompted to continue with the push process (to continue, type y and press Enter).

Once the push process is complete, you must reboot (press Enter and remove the

USB key).

Caution

During Critical Operation in Progress, do not interrupt the process.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

Dell Wyse WES7 conversion kit for Z class Instalační příručka Strana 15